Insta Mounts

For Instant Scope Mounting of Ex-Military Firearms
No Drilling or Tapping Required

S & K INSTA MOUNT BASES

The BEST WAY to mount a scope on your ex-military rifle. WHY?

  • No major alteration to your valuable firearm
  • No drilling or tapping of the ultra hard receiver
  • Do the work yourself
  • Handsome ruggedness
  • Guaranteed to hold zero
  • Low cost for a quality product
  • Unmatched versatility
  • Can be removed and/or reinstalled easily
  • Fast service

INSTA MOUNT RING STYLE SELECTION

     Some of our Insta Mounts are available in both the S&K style (to accept S&K rings) and the Weaver ring style (to accept Weaver rings). These ring styles are NOT interchangeable. The distinction is made via the order numbers associated with each mount. All order numbers ending in a 65 include a pair of S&K machine finished 1" scope rings (H1B). Order numbers ending in 60 include the base only in the S&K ring style so be sure to have some S&K rings available; deduct value of rings to determine cost. See Order Page. All order numbers ending in 70 or 70B are for Weaver rings (not included).

ADVANTAGES OF S&K MOUNTING SYSTEM

  • Front and rear rings are interchangeable
  • Ring studs mate to matching receptacles in bases
  • BOTH rings bear against front of their respective
    receptacles (both absorb recoil shock)
  • Trim in appearance, light in weight
  • Precision bored - scope will not slip
  • No knobs, bolts or other obtrusions to break or bend
  • Fit any 1 inch scope tube

     All S&K rings are fully machined out of solid steel bar stock, tumble finished to remove all burrs, and have a 3/8" diameter stud that locks into a 3/8" hole or slot in the base which provides windage adjustment. The rings are locked into position by tightening cooperative cone pointed set screws. The rings are precision bored to 1" diameter and, being machined rather than extruded or stamped, form a precision fit that will not slip under recoil. They are nicely contoured and trim in appearance. Our rings are tumble finished and blued to achieve a military-type dull or nonglare black finish that matches the black anodized Insta Mount bases. Also available in this finish are our H1BH High rings which place the scope approx. 1/8" higher.